Products

Vertical Multistage Inline Pump

A more economical approach to develop high pressures with a single centrifugal pump is to include multiple impellers on a common shaft within the same pump casing. Internal channels in the pump casing route the discharge of one impeller to the suction of another impeller. The pump consists of a base and a pump head and chamber stack. The outer sleeves are secured between the pump head and the base by means of staybolts. The base has suction and discharge ports on the same level (in-line).

Horizontal Multistage Pump

Horizontal multistage centrifugal pump consists of two or more impellers. They are used in pumping services of moderate-to-high TDH (total dynamic head). Each stage is essentially a separate pump. All the stages are within the same housing and installed on the same shaft. Maximum Six stages can be installed on a single horizontal shaft. Each stage increases the head by approximately the same amount.

Centrifugal Monoblock pump

A Monoblock pump is a mechanical device wherein the motor as well as the pump is assembled jointly within a similar shelter. The shaft of the pump system includes revolving parts. A centrifugal monoblock pump as the name suggests functions on the basis of centrifugal force. It converts the energy provided by the motor to the energy within the liquid being pumped. Fresh water and fluids that are not chemically aggressive to pump components are recommended for centrifugal monoblock pumps.

Centrifugal end suction pump

End Suction Pumps are centrifugal pumps that are typically designed horizontally and as single-stage pumps. End Suction Pumps are cost-effective and reliable. They are widely used in applications such as HVAC, irrigation, and in applications including industries such as food, sugar, paper, chemical, cement, and construction.

self priming mud pump

Non clog self-priming pumps are designed to handle raw water, muddy water, sewage and liquid with semi solids. These pumps are supplied as bare pump or monoblock type and available in both single phase and three phase power supply. Mono block pumps are coupled to a totally enclosed fan cooled motor for continuous duty.

Sewage Submersible Pump

Submersible sewer pumps are designed to handle raw sewage, including solids and fibrous materials, without clogging, ensuring continuous and efficient operation. Their robust construction and ability to operate entirely submerged make them ideal for the demanding conditions found in municipal waste water systems.

Electronic Dosing Pump

Electronic Dosing Pumps are advanced chemical dosing pumps designed for precise and automated chemical injection. These pumps utilize electromagnetic technology to deliver accurate dosing, making them ideal for applications such as chlorine dosing in water treatment plants. As a type of digital metering pump, they offer high precision and control over dosing rates. Electronic dosing pumps are commonly manufactured for industries requiring exact chemical measurements. They are also known for their efficiency and reliability.

Hydraulically Diaphragm Dosing Pump

A Hydraulically Actuated Diaphragm Dosing Pump is a type of chemical dosing pump widely used in industrial applications, particularly for water treatment plants. This diaphragm pump operates by using hydraulic fluid to actuate the diaphragm, allowing for precise, leak-free dosing of chemicals. As a diaphragm metering pump, it ensures accurate control of fluid flow and can handle corrosive or hazardous chemicals with ease. Designed for reliability, the chemical dosing diaphragm pump is perfect for water treatment processes where precise chemical dosing is critical. Its hydraulic actuation allows it to function effectively even in high-pressure environments.

Plunger Dosing Pump

A Plunger Dosing Pump is a type of metering pump designed for high-precision chemical dosing in industrial applications. As a chemical pump, it uses a plunger mechanism to deliver accurate volumes of fluids, making it ideal for high-pressure environments. These pumps are commonly used as chemical dosing pumps in industries such as water treatment, oil and gas, and chemical processing. The motorized dosing pump option allows for automated control, ensuring reliable and consistent flow rates. Known for their durability and ability to handle corrosive chemicals, plunger dosing pumps are essential in precise fluid handling systems.

Screw Pumps

Progressive Cavity Screw Pumps are high-performance positive displacement pumps designed for precise fluid handling. These pumps use a screw mechanism to move fluids steadily and are ideal for applications requiring accurate metering, such as a chlorine dosing pump in water treatment. As a metering pump, they offer consistent flow control, even with high-viscosity fluids. Known for their efficiency, screw pumps provide reliable performance in demanding environments, making them suitable for chemical dosing and other industrial processes. Unlike reciprocating pumps, progressive cavity pumps ensure smooth, continuous operation with minimal pulsation.

Mixer and Agitator

A Mixer is a versatile device used for efficient blending and homogenization in industrial processes. Commonly employed as a flash mixer in water treatment, it ensures rapid and uniform distribution of chemicals. Stirrers and agitators are integral components of industrial mixers, providing the necessary mechanical action to achieve optimal mixing performance. These mixers are essential in a wide range of industries, from chemicals to pharmaceuticals, offering consistent and reliable results in processes where thorough mixing is critical.

pressure booster pump

The KSB KHM 404 1HP Single Phase Multiboost Pressure Pump with 24L Tank is a booster pump that is the only choice for boosting the pressure of water in your home or office. This pump is capable of boosting the pressure up to 2.5 bars and comes with a 24L tank for storing water. Are you looking for a Booster Pump with competitive price and best quality? Look no further than KSB. Our Booster Pumps are designed for high efficiency and performance, and are available in 50 Hz frequency and 220 V voltage. Choose from 1 HP or 3 HP options to find the perfect Booster Pump for your needs.

Submersible pump

Submersible pump in multi-stage construction with radial or mixed flow impellers coupled with oil and water filled, single phase submersible motors. Pumps with SS jacket are also available from 75mm and 100 mm diameter. Suitable for horticulture, irrigation, housing, building services and farm houses, ornamental fountains etc.

Openwell Submersible Pump

Single Stage & Three phase openwell Submersible pumps. Applications - agriculture, drinking water supply, fountains, buildings, farm houses etc. Available in both Aluminium and Copper rotor. Motor rating – upto 30HP.

P P centrifugal monoblock pump

An essential member of our JPP series pumps is the JPP M Series which provides the option of having a polypropylene monoblock pump. As the name suggests, monoblock pumps have a single unit wherein the motor, and the pump are assembled jointly. Monoblock pumps have the advantage of avoiding transmission losses and hence can operate at 10% extra efficiency. The JPP M Series pumps are made of a special synthetic resin made through the polymerization of propylene. This gives these pumps extra toughness, making them lightweight and resistant to fire or harsh weather.

PP polypropylene centrifugal pump

Corrosion Resistant Polypropylene Centrifugal Pumps The extremely strong and durable Corrosion Resistant Polypropylene centrifugal pumps can handle highly corrosive liquids, like acid, harsh chemical substances, and solvents. Endowed with a rugged design, the machine can be used for intermittent intervals, as well as continuous flow of fluid applications

Chemical Process Pump

Considering the dynamic needs of chemical industries, This pump’s design, materials and operations are highly suitable for various chemical industries. These pumps are fully compliant with ISO 2858 and ISO 5199. Moreover, they operate at a high-temperature variation from -40°C to 400°C, making these pumps more versatile. These pumps are available in various materials like Alloy, CI, CS and more. Hence the industries can opt for the make that is best suited for their application.

Centrifugal Pump ( semi open impeller)

End Suction, Horizontal, Centrifugal Coupled Pumps with Semi-Open Impeller These pumps are ideal for liquids with slight impurities or non-aggressive wastewater. This specific range of horizontal centrifugal pumps flaunts of a highly efficient mechanism which is as good as closed impellers centrifugal pumps.

Vertical Seal/Gland Less PP Pumps

Vertical Seal/Gland Less Pumps The non-mechanically designed seals/glands of this pump makes operating them ridiculously easy. It can also provide effluent treatment plans which can increase your efficiency.

Filter Press Side Suction Pump

Horizontal Single Stage Side Suction Pumps The Horizontal Single Stage Side Suction Pumps are designed to generate low-pulsation suction air which is ideal for effluent treatment plants, steel rolling machines, and sugar manufacturing.

Self Priming Centripetal Pumps

Self Priming Centripetal Pumps Redefining the standards of self priming pumps in the industry, the JSP series features the best quality pumps that can effortlessly process liquids like kerosene, diesel, acids and many more without needing a foot valve. This simple and compact pump generates the least amount of noise which makes it comfortable to operate.

MOTORIZED HYDRAULIC TEST PUMP

Hydraulic test pumps create pressurized testing conditions for various industrial infrastructures. This diagnostic technique is used to perform high-pressure testing of tubes, pipes, cylinders and even pressure vessels like boilers. The objective is to check for any existing defects and test the vessel’s endurance. The JTPM Series Motorized Hydraulic Test Pumps can generate pressure up to 700 kg/cm2 and are widely used to test high-value pressure vessels. These pumps are built with strength and come loaded with various necessary pump auxiliaries needed for high-pressure testing.

HYDRAULIC TEST PUMP

This hydraulic test pump plunges liquids from tanks into the tested containers. The series has two variants – hand-operated and motorized. In this hand-operated version, the lever on the top of the machine is embedded to generate higher pressure by applying manual force. The lightweight and maneuverability of the pump make it easy to be handled by one person. In addition, the pump comes along with a series of accessories which enhance its functionality.

AIR OPERATED DOUBLE DIAPHRAGM (AODD) PUMP

Air-operated diaphragm (AODD) pumps are positive displacement pumps consisting of two pumping chambers. The pumping action is created by the movement of compressed air in these chambers. Because of this, the pumps are used for low-pressure applications but are known for their leakproof and robust operations. Air-Operated Double Diaphragm pumps that employ two diaphragm layers to make the pump operations more efficient. As these pumps operate with compressed air and not electricity, they have a wide range of applications, from hazardous materials to highly viscous fluids.

Rotary Gear Pumps

Multi Purpose Rotary Gear Pumps with Double Helical Gears This compact pump is a self priming pump which provides higher efficiency and lesser noise in comparison to conventional pumps. The double helical gears imbedded in the machine reduces axial thrust and can provide continuous processing. The pump is uniquely designed to handle multiple liquids with the highest standard of quality.

SS ROTARY GEAR PUMPS

A unique addition to our rotary gear pumps collection is the Stainless Steel Rotary Gear Pumps. This pump comes with advantages of a rotary gear pump like being compact, highly efficient and operating with minimum noise. The double-helical gears ensure that the axial thrust is reduced and allows continuous operation. The stainless steel construction allows this pump to handle various corrosive and viscous liquids with zero leakages. These pumps are easy to maintain, can be cleaned quickly and are resistant to corrosion and hence are used in various applications.

SELF PRIMING MUD PUMP

Single Stage Horizontal, Non-Clog Self Priming, Mud/Sewage Pumps (Mechanical Seal Type) Our JMSP Series features some of the most efficient and high powering pumps in our arsenal. From perfectly sealed design to extremely smooth bearings, it will give to the highest quality performance without any need for inspection or maintenance.

HORIZONTAL SPLIT CASING PUMPS

The horizontal split case pump. This pumps horizontally axially split casing pumps, the pump casing is divided into two different chambers. The casing split in this pump is horizontal to the impeller. The suction and discharge nozzles are in the bottom case fitted side by side while the impeller is positioned between the two bearings. This robust pump design allows higher flow capabilities with minimal power consumption. These pumps typically transfer low viscosity fluids with a high flow rate in various water transfer applications.

PVDF Centrifugal Process Pumps

Considering the rising demand for chemically inert pumps in the plastic and chemical industries, This is PVDF Centrifugal Process Pumps. These pumps are made from Polyvinylidene Fluoride, which provides them with excellent resistance to chemical reactions and also enhances their overall life. Fundamentally they are centrifugal pumps designed for aggressive working environments and high-pressure systems. Moreover, its heavy-duty pedestal and metallic shell provide them much-needed stability. While they are extensively used by plastics and chemical industries, many other industries like water systems, metal finishing and steel manufacturing use this pump.

HIGH HEAD SELF PRIMING PUMP

High-head Self Priming Pumps to cater to the high-head requirement of various industries. These multi-stage pumps are designed in such a way that they can generate a high amount of pressure and suction lift. Moreover, with its Horizontal and lateral channels, the self-priming design can operate continuously while handling clear liquids. Hence they are widely used in fire-fighting applications, boiler feed cycles and other industrial applications which need high-head delivery.

CENTRIFUGAL HIGH PRESSURE PUMP

Centrifugal High-Pressure Multi-Stage Pumps. These pumps are embedded with several impellers, which help in generating very high pressure. Hence they are extensively used in industrial applications demanding high pressure. The pump is designed to operate stably even with such a high-pressure load. This Centrifugal High-Pressure Multi-Stage Pumps can also withstand temperatures up to 140°C making them more versatile. In addition, these pumps are comparatively more economical and allow customizing the pressure levels.

CENTRIFUGAL PROCESS PUMPS (ANSI) IN INVESTMENT CASTING

Customizing our trademark centrifugal pump to suit process industries as per ANSI standards, this is the first of its kind energy-efficient pump that can help lower your power consumption. It is also available for standard and low-flow models, and you can customize it as per your industrial requirements. Another advantage of this pump is that it is part-for-part interchangeable with other centrifugal pumps. As a result, industries can use it in almost all types of processes, be it the oil & gas, food processing, pulp & paper and even power plants.

PULP & PAPER MILL INDUSTRIAL PUMP

Single Stage, End Suction Back Pull Out Type Centrifugal Process Pumps Pulp & Paper Mill Industries Plant Powered by high propelling CT pumps, this centrifugal process pump is ideal for processing raw materials for pulp and paper mill industries. With its simple design and low-cost maintenance, it is one of the optimum machines in the industry.

Fire Fighting Pumps

fire pump solution includes standard firefighting pumpset, FM/UL fire pumps, Multi-Stage Multi-Outlet (MSMO) fire pumps